URBAN AIR MOBILITY VEHICLES
SPACE PLATFORMS

GSE101-0000-00
GSE101-0000-00
Linear Actuator
Linear Actuator
GSE101-0000-00 is designed and developed for use in guidance systems. Indigenous design includes a high power slotless BLDC motor along with gearbox and encoder.
Incremental rotary encoder
Field-proven
Configurations for different stroke, load & speed
Optional absolute position feedback
Optional Holding Brake

GSE101-0000-03
GSE101-0000-03
Linear Actuator
Linear Actuator
This actuator is a variant of GSE101-0000-00 where mechanical joint geometry and operating range are customized for the application.

GSE101-0000-05
GSE101-0000-05
Linear Actuator
Linear Actuator
A variant of GSE101-000-00 where mechanical joint geometry and operating range are customized for the application. Includes a linear absolute positioning sensor and anti-rotation system.

GSE101-0000-09
GSE101-0000-09
Linear Actuator
Linear Actuator
Includes the highest dynamic and static load limits among GSE101 product family along with linear absolute positioning sensor and antirotation system.

GSE102-0000-00
GSE102-0000-00
Linear Actuator
Linear Actuator
This solution is designed specifically for circumstances with volume and interface limitations. Parallel configuration of the motor and output drive with an intention to reduce products total length.

GSE103-0000-00
GSE103-0000-00
Linear Actuator
Linear Actuator
This product includes a 900W output power slotless BLDC motor, planetary gear box, electromechanical power-off brake, and incremental rotary encoder.
Incremental rotary encoder
Power-off brake
High power density planetary gearbox
High stroke capacity
GUIDANCE PLATFORMS / MISSILE SYSTEMS
LAND PLATFORMS

RPU101-0000-00
RPU101-0000-00
Antenna Rotary Positioning Unit
Antenna Rotary Positioning Unit
RPU is a pan-tilt system, which stands out with its 80kg load capacity, 0.1 degree positioning accuracy and compact structure. This rotary positioning unit offers 2 degrees of freedom. It can scan ± 180 degrees in pan movement and ± 90 degrees in tilt movement. Version with 3 degrees of freedom and different options is still under development.
RPU is used as an antenna routing unit on land and sea platforms and can be controlled by auxiliary control units: HCU (hand control unit) and RCU (surface mountable control unit).

ATK100-0000-00
ATK100-0000-00
Gun Turret Control System
Gun Turret Control System
The T-129 ATAK helicopter is a development project consisting of subsystems that provide nose gun guidance and fire control.
The subsystems designed, manufactured and qualified by ANDAR as part of this program are:
– Turret Electronic Control Unit: The unit that provides the interface between the Gun and the Pilot over the MIL-STD-1553B protocol and controls the electronic/electromechanical units.
· Servo Motor: Rotary motors that move the gun turret in elevation and azimuth.
· Gun Drive: The rotary motors that feeds ammunition to the revolving gun.
· Elbow: Ammunition feeding support motor.
· Round Counter Sensor: Magnetic sensor that counts how many shots are fired.
· Firing Contact: Ignition contact that interfaces with the projectile for electronic ignition.
· Feeder Solonoid: Solenoid that opens the ammunition feeding path.
· Elevation and Training Sensors
· Harnesses
First Rotary Turret Gun subsystem developed in Turkey. The system can also be used on ground, naval and other aerial platforms.
Provides remote control of a Gun Turret
Operation is possible at helicopter speeds up to 140 knots and the firing position is maintained under all critical flight and maneuver conditions.
Provides flexible and fixed modes of fire.
In case of aircraft or turret power failure the weapon returns to the fixed forward firing position and is automatically locked.
In-flight health monitoring
Operating Temperature -40°C / +55°C
HOW WE WORK
Designing and producing market leading electromechanical actuators requires a multidisciplinary team and full knowledge of the system -including subcomponents.
At ANDAR, we design and develop 100% of all our products and complement our design with our in-house production capabilities for delivering end-to-end solutions to meet our customers’ needs.
We design and produce flightworthy products based on aerospace & certification standards (MIL-STD-810, MIL-STD-461, DO254, DO160). Our tools and procedures are compliant with ARP4761 to support integrators safety assessment process. We are in process of acquiring AS9100 certification covering all these aspects.
At ANDAR we not only design the EMAs but also the precise motors, transmission, structural elements, controllers, and drivers. Our competence on subcomponents makes it possible to design products beyond industry standards and customer expectations.
Our design and development capabilities are backed by our successful production system to deliver extraordinary results. In our production facilities, we don’t only produce the end products but also the critical subcomponents such as precise motors, transmission, and controllers.
We are a technology pioneer in electromechanical actuation space and we are working hard to realize our mission to “Actuate the World” by becoming an indispensable partner of the projects that shape the world.
Our team is adhocracy oriented; dynamic and entrepreneurial, with a focus on risk- taking, innovation, and “doing things first”.
Our customers are our partners in defining the newly uncovered needs of aerospace and defense, as well as solving new generation actuation problems.
Our unique technical know-how and experience on EMAs to the slightest detail, enable us to design and produce high precision test equipment to be used to test our products and others also.
Our promise goes beyond delivering the product. We offer periodical maintenance services for our products covering the whole life cycle.
Considering the needs, we are able to design and produce EMAs that wouldn’t require maintenance throughout the lifecycle.
HOW WE WORK
Designing and producing market leading electromechanical actuators requires a multidisciplinary team and full knowledge of the system -including subcomponents.
At ANDAR, we design and develop 100% of all our products and complement our design with our in-house production capabilities for delivering end-to-end solutions to meet our customers’ needs.
We design and produce flightworthy products based on aerospace & certification standards (MIL-STD-810, MIL-STD-461, DO254, DO160). Our tools and procedures are compliant to ARP4761 to support integrators safety assessment process. We are in process of acquiring AS9100 certification covering all these aspects.